As an Amazon Associate I earn from qualifying purchases.

Clever design - the qianli mega-idea 3 in 1 pre-heating Station is cleverly designed to support all 3 iPhone 11 logic boards, there are no extra moulds to buy or use. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation.
Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation. Removing gum from ic chips, PRE-Heating logic boards, Removing and replacing IC Chips. Standalone unit - this is a fully heated and powered self sufficient unit, and will work standalone. Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature.

Ready for you to install. Thoroughly tested - all screens are tested for touch responsiveness, display quality, and appearance quality. Brand new glass screen with oem mid-frame for best wifi and GPS sensitivity. This is the replacement screen with the same Original and Authentic digitizer and LCD as the screen you have on your device.

Brand new glass screen. There may be minor scratches or marks on the back frame during testing and handling. Thoroughly tested - all screens are tested for touch responsiveness, display quality, and appearance quality.


Why use it? - this soldering platform is used for reflowing logic boards, PRE-Heating logic boards, Also used for Layered logic board Separation. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation.
Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature. Clever design - the qianli mega-idea 3 in 1 pre-heating Station is cleverly designed to support all 3 iPhone X logic boards, there are no extra moulds to buy or use. Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature.


Warranty: ultra-thin blades will offer the best solution to pry out the chip easily without any damage. Easy to use: perfect phone OCA Glue cleaning tool for iPhone motherboard and LCD screen.


Application - either solder when bridging the wires or use green oil and UV to keep the pads in place on the board. After effect - with this set you can re-bridge and re-pad without the issue of circuitous flyline and keep the board working well and maintaining efficiency after the repair.
After effect - with this set you can re-bridge and re-pad without the issue of circuitous flyline and keep the board working well and maintaining efficiency after the repair. Efficient - this jumpwire and pad set makes bridging and replacing old pads much easier than before making these types of repairs less hassle and increasing the efficiency.
1. Hobbes
#ad
Workstation Repair Tool Kit, Hobbes HT-2020
#adHobbes #ad - All in one workstation Tool Kits. Case to Keep Organization. Case handle and shoulder Strap For Comfort and Easy Mobility. Quality Tools.More information #ad
Brand | Hobbes #ad |
Manufacturer | Hobbes Corporation #ad |
Part Number | HT-2020 |
Model | HT-2020 |
Warranty | 1 Year Warranty |
More information #ad
2. ffs
#ad
11 Pro Max, 11 Pro, MEGA-IDEA Soldering Platform Logic Board Separation IC Repair Tool For iPhone 11
#adffs #ad - Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation. Supports 110v - 220V and has a digital temperature display.Clever design - the qianli mega-idea 3 in 1 pre-heating Station is cleverly designed to support all 3 iPhone 11 logic boards, there are no extra moulds to buy or use. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation.
More information #ad
Removing gum from ic chips, PRE-Heating logic boards, Removing and replacing IC Chips. Removing gum from ic chips, PRE-Heating logic boards, Removing and replacing IC Chips. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation. Removing gum from ic chips, PRE-Heating logic boards, Removing and replacing IC Chips. Standalone unit - this is a fully heated and powered self sufficient unit, and will work standalone. Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature.
Brand | ffs #ad |
Manufacturer | QianLi #ad |
Height | 0.2 Inches |
Length | 5.91 Inches |
Width | 2.76 Inches |
Part Number | misp11 |
Model | misp11 |
Warranty | 3 Months after date of purchase |
More information #ad
3. Lenwell
#ad
Original Non-Aftermarket Digitizer Screen Touch Assembly LCD Display for Samsung Galaxy Note 9 N960 N960U N960W SM-N960F SM-N960/DS SM-N960F/DS with Frame + Tools Black with Frame
#adLenwell #ad - There may be minor scratches or marks on the back frame during testing and handling. No soldering needed. It does not have the bad user experience that may come with aftermarket screens.Ready for you to install. Thoroughly tested - all screens are tested for touch responsiveness, display quality, and appearance quality. Brand new glass screen with oem mid-frame for best wifi and GPS sensitivity. This is the replacement screen with the same Original and Authentic digitizer and LCD as the screen you have on your device.
More information #ad
Rest assured that you will get the best quality LCD. Pre-assembled - glass panel, digitizer, and the LCD are assembled into one unit with frame. Hold power and volume down buttons to turn on screen after installation. Get ride of the scratches and cracks on your old LCD. Professional 5-in-1 screwdriver and B-7000 included.Brand | Lenwell #ad |
Manufacturer | Lenwell #ad |
Height | 0.1 Inches |
Length | 6.37 Inches |
Weight | 0.25 Pounds |
Width | 3.01 Inches |
More information #ad
4. Lenwell
#ad
Original Quality Non-Aftermarket Digitizer Screen Touch Assembly LCD Display for Samsung Galaxy S20 FE 5G G781 G781B G781U G781F/DS G781W with Frame + Tools Mint
#adLenwell #ad - Professional 5-in-1 screwdriver and B-7000 included. Hold power and volume down buttons to turn on screen after installation. It does not have the bad user experience that might come with aftermarket screens.Brand new glass screen. There may be minor scratches or marks on the back frame during testing and handling. Thoroughly tested - all screens are tested for touch responsiveness, display quality, and appearance quality.
More information #ad
No soldering needed. Rest assured that you will get the best quality LCD. Pre-assembled - glass panel, digitizer, and the LCD are assembled into one unit ready for you to install. Get ride of the scratches and cracks on your old LCD. This is the same original, genuine, oem lcd as the screen you have on your device.Brand | Lenwell #ad |
Manufacturer | Lenwell #ad |
Height | 0.1 Inches |
Length | 6.29 Inches |
Weight | 0.44 Pounds |
Width | 2.97 Inches |
More information #ad
5. TinyCircuits
#ad
TinyTV DIY Kit
#adTinyCircuits #ad - A beautiful and vibrant full-color OLED screen. Includes Tiny Remote with battery. Microsd card included and preloaded with content. Arduino-compatible platform with a powerful 32-bit ARM processor. Built-in speaker, Rechargeable lithium battery + USB port for charging.More information #ad
Brand | TinyCircuits #ad |
Manufacturer | TinyCircuits #ad |
Weight | 0.16 Pounds |
Part Number | ASK4002 |
More information #ad
6. ffs
#ad
XS Max, XS, MEGA-IDEA Soldering Platform Board Separation IC Repair Tool For iPhone X
#adffs #ad - Supports 110v - 220V and has a digital temperature display. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation. Standalone unit - this is a fully heated and powered self sufficient unit, and will work standalone.Why use it? - this soldering platform is used for reflowing logic boards, PRE-Heating logic boards, Also used for Layered logic board Separation. Why use it? - this soldering platform is used for reflowing logic boards, Also used for Layered logic board Separation.
More information #ad
Removing gum from IC chips, Removing and replacing IC Chips. Removing gum from ic chips, PRE-Heating logic boards, Removing and replacing IC Chips. Removing gum from ic chips, PRE-Heating logic boards, Removing and replacing IC Chips. Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature. Clever design - the qianli mega-idea 3 in 1 pre-heating Station is cleverly designed to support all 3 iPhone X logic boards, there are no extra moulds to buy or use. Fast - the speed increases to 183 Celsius very quickly, no waiting around for the unit to come up to temperature.
Brand | ffs #ad |
Manufacturer | QianLi #ad |
Height | 0.2 Inches |
Length | 5.91 Inches |
Width | 2.76 Inches |
Part Number | mispx |
Model | mispx |
Warranty | 3 Months after date of purchase |
More information #ad
7. REGENI
#ad
REGENI 10pcs RG-513 Disassembly tool made of ESD preventive antistatic to pry up electronic case repair mobile smart phone
#adREGENI #ad - Squeeze spatula function: Removing Flex, Solder cream application, chemicals. Two functions available : delicate work by carbon plastic / Required strong force by SUS, NO REFUND is accepted. Stable smartphone case disassembly : LCD, case, and parts.More information #ad
Prevention of static electricity : Applied Caborn nano tube material, Surface resistance : 10E8. No repalcement is accepted. Applied semi-permanent suSStainless Steel through rough grinding and precise grinding for smooth edge to minimize scratches during disassembly.Brand | REGENI #ad |
Manufacturer | REGEN-I,INC #ad |
Height | 0.04 Inches |
Length | 0.82 Inches |
Weight | 18 Grams |
Width | 6.72 Inches |
Part Number | RG-513 |
Model | RG-513 |
More information #ad
8. DIYPHONE
#ad
28 in 1 CPU NAND Flash Remove Graver Blade Glue Cleaning Knife for Mobile Phone Repair Hand Tool Set Motherboard Soldering Repair Tool
#adDIYPHONE #ad - Design: 27 different angles can ensure you can use it around any direction, it will not lead any inconvenience during your phone repair work.Warranty: ultra-thin blades will offer the best solution to pry out the chip easily without any damage. Easy to use: perfect phone OCA Glue cleaning tool for iPhone motherboard and LCD screen.
More information #ad
What you get: 27 kinds of blade set which can meet most of the cleaning operation on motherboard repair or cleaning. Applicable: phone bga chip remover blade is common used disassembly tools for small and slightly smaller IC parts on the motherboard of the mobile phone.Brand | DIYPHONE #ad |
Manufacturer | VIPFIX #ad |
Part Number | 699912244581 |
Model | FIX251C |
More information #ad
9. Walfront
#ad
Phone Motherboard Fixture BGA Fixture Holder IC Chip Soldering PCB Fixing Holder Phone Repair Clamping Tool
#adWalfront #ad - Free your hand-this fixture could fix the workpieces, you can free you hand and also avoid hazard to your hands. Easy to clean-with light weight and small size, and high quality steel body, which is resistant to heat, easy to clean.More information #ad
Fit for-the fixture is an ideal auxiliary tool for hobby work, small workpiece repairs, workshop, etc. Free your hand-this fixture could fix the workpieces, you can free you hand and also avoid hazard to your hands. For efficient work-this fixture can hold two circuit boards at the same time, greatly improving work efficiency.Brand | Walfront #ad |
Manufacturer | Walfront #ad |
Height | 0.79 Inches |
Length | 9.06 Inches |
Width | 4.33 Inches |
Part Number | Wal frontgo89w3ytqs |
More information #ad
10. fonefunshop
#ad
Fonefunshop Relife 1440 Dot Repair Spots, IC Chip Solder Pads for Microsoldering Jumpwire Phone Repair
#adfonefunshop #ad - Variety - there are a variety of different jumpwire and pads in this set to help in multiple situations. What is it? - this tool provides a set of solder pads and jumpwire which can be used to re bridge wires on a circuit board as well as replace old, faded dots on a circuit board.Application - either solder when bridging the wires or use green oil and UV to keep the pads in place on the board. After effect - with this set you can re-bridge and re-pad without the issue of circuitous flyline and keep the board working well and maintaining efficiency after the repair.
More information #ad
What is it? - this tool provides a set of solder pads and jumpwire which can be used to re bridge wires on a circuit board as well as replace old, faded dots on a circuit board. After effect - with this set you can re-bridge and re-pad without the issue of circuitous flyline and keep the board working well and maintaining efficiency after the repair. Efficient - this jumpwire and pad set makes bridging and replacing old pads much easier than before making these types of repairs less hassle and increasing the efficiency.
Brand | fonefunshop #ad |
Manufacturer | ffs #ad |
Height | 0.2 Inches |
Length | 5.91 Inches |
Weight | 0.1 Kilograms |
Width | 2.76 Inches |
Part Number | reldot |
Model | reldot |
Warranty | 3 Months after date of purchase |
More information #ad