Top 10 IDE to SATA Adapter – SATA Cables

As an Amazon Associate I earn from qualifying purchases.

1. StarTech

 #ad

40-Pin PATA to 2.5" SATA HDD / SSD / ODD Converter IDE2SAT2, StarTech.com IDE to SATA Hard Drive or Optical Drive Adapter Converter

#ad
StarTech #ad - Connect a sata device to an IDE/ATA motherboard or controller card. Supports sata i/ii/iii 1. 5/3/6gbps drives. Support for 48-bit Logical Block Addressing LBA. Compliant with SATA revision 1. 0 specification. Complete hardware solution; no software required.
BrandStarTech #ad
ManufacturerStarTech.com #ad
Height0.9 Inches
Length3 Inches
Weight0.06 Pounds
Width0.8 Inches
Part NumberIDE2SAT2
ModelIDE2SAT2
Warranty2 Year

2. Kingwin

 #ad

& Compatible w/ SATA I/II/III Hard Drives, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, Kingwin SSD/SATA to IDE Bridge Board Adapter, 3.5 Inch HDD

#ad
Kingwin #ad - Data transfer rate up to 3. 0 gbps. Two led indicators for "power on" green and "HDD" red. Convert all saTA devices to IDE.
BrandKingwin #ad
ManufacturerKingWin #ad
Height0.98 Inches
Length5.51 Inches
Width3.34 Inches
Part NumberADP-06
ModelADP-06
Warranty1 year

3. chenyang

 #ad

CY IDE/PATA 40Pin Disk to SATA Female Adapter PCBA Converter for Desktop & 3.5" Hard Disk Drive

#ad
chenyang #ad - For desktop & 3. 5" hard disk drive, works with all IDE 40Pin Drives up to 1000GB. Adapter is good for up grading an old computer with 3. 5 inch ide hdd to a new 3. 5 inch sata hdd or SSD. No driver needed, xp, plug and play, unit is not hot swappable. Supports ide 66/100/133mb/s. 3. 5 inch ide/pata 40pin hdd drive to sata Female Converter Adapter PCBA. No need for an extra power supply. Compatible with dos, 2000, vista, me, windows 98/98SE, 2003, Windows 7 & Linux.
Brandchenyang #ad
ManufacturerCY #ad
Part NumberEP-096

4. NFHK

 #ad

NFHK SATA Disk to IDE/PATA 40Pin Motherboard Converter Adapter PCBA for Desktop & 2.5 3.5" Hard Disk Drive

#ad
NFHK #ad - With master and slave jumper. Works with all 2. 5/3. 5" sata drives. No driver needed, plug and play, unit is not hot swappable. Supports ide 66/100/133MB/s. 3. 5 inch sata hdd drive to idE 40Pin mainboard converter Board.
BrandNFHK #ad
ManufacturerNFHK #ad
ModelEP-014

5. Inateck

 #ad

SA03001, Inateck USB 3.0 to IDE/SATA External Hard Drive Reader Applicable to 2.5"/3.5" HDD/SSD, with 12V/2A Power Supply

#ad
Inateck #ad - Universal usb to sata/ide adapter: supports 2. 5"/3. 5" sata hdd and ssd, sata dvd-rom, 2. 5"/3. 5" ide hdd, dvd-rw, cd-rw, dvd+rw optical Drive, two IDE connector Plus one SATA III connector.

It allows users to operate 2 HDDs One IDE and One SATA simultaneously. X. Support systems: windows 11/xp/vista/7/8/1032bit and 64bit; Mac OS 10 Additional functions: plug and play; support hot swap; on/off switch for HDD protection. Works with up to 3 hdds: this usb 3. 0 to ide and sata adapter is equipped with a sata iii connector and 2 ide connectors one 2. 5" and one 3. 5". It’s compatible with 2. 5"/3. 5" ide/sata hard drives. Led light shows power and activity status. High speed transfer: data transfer speed reaches up to 5Gbps. Backward compatible with USB 2. 0/1. 1.
BrandInateck #ad
ManufacturerInateck #ad
Height0.61 Inches
Length3.15 Inches
Width2.48 Inches
Part NumberSA03001-BK
ModelSA03001
Warranty1 Year

6. cablecc

 #ad

Cablecc IDE/PATA 40Pin Disk to SATA Female Converter Adapter PCBA for Desktop & 3.5" Hard Disk Drive

#ad
cablecc #ad - No driver needed, plug and play, unit is not hot swappable. Adapter is good for up grading an old computer with 3. 5 inch ide hdd to a new 3. 5 inch sata hdd or SSD. Supports ide 66/100/133mb/s No need for an extra power supply. Compatible with dos, vista, xp, me, windows 98/98SE, 2000, 2003, Windows 7 & Linux.3. 5 inch ide 40pin hdd drive to sata converter board Works with all IDE 40Pin Drives up to 1000GB.
Brandcablecc #ad
Manufacturercablecc #ad
Part NumberEP-096

7. AGPTEK

 #ad

AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5", with External AC Power Adapter Included, Compatible with USB 1.1/2.0/3.0

#ad
AGPTEK #ad - Usb 2. 0 standard, 480M bps full speed. Connect your ide to usb adapter to your computer through a USB port. This usb sata ide adapter is easy to use and plug & play, no drivers needed.

External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage. Usb 2. 0 to 2. 5" 3. 5" ide sata hdd hard drive converter adapter cable + ac power adapter, supports sata hard disk / ata/atapi cd-rom/r/RW DVD-ROM based on ATAPI spec. 480 mb/s high speed transfer rate USB 2. 0 specification, limit depend on the IDE device/SATA device and the driver. Use your 2. 5" / 3. 5" ide hard drive or sata hard disc as an external hard drive. Agptek sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable. Connect to the ide device using usb interface and SATA device too.
BrandAGPTEK #ad
ManufacturerMamBate #ad
Height2.2 Inches
Length6.8 Inches
Weight0.7 Pounds
Width5 Inches
Part NumberU1S-MB
ModelU1S-MB

8. CERRXIAN

 #ad

CERRXIAN SATA Female to 40 pin Male 3.5 inch IDE Adapter for PC to SATA Hard Drive Interface Adapter

#ad
CERRXIAN #ad - No driver needed, plug and play. One female sata 7+15pin port, one 3. 5male pata port 40-pin IDE, and one 4-pin Molex power connection Adapter. Converts parallel atapata, ata, ide to serial ata sata converts SATA to PATA/ATA/IDE/EIDE. Package: sata to Pata Interface Adapter x1. Sata female to 40 pin male 3. 5 inch ide adapter allows you convert hard drive interfaces to work with newer/older systems.
BrandCERRXIAN #ad
ManufacturerLemeng #ad
Height0.75 Inches
Length3.9 Inches
Weight0.03 Pounds
Width0.63 Inches
Warranty0

9. Unitek

 #ad

IDE Hard Drive Adapter for Universal 2.5"/3.5" Inch IDE and SATA External HDD/SSD, Support 10TB, Unitek SATA/IDE to USB 3.0 Adapter

#ad
Unitek #ad - Universal ide hard drive adapterdual-head ide connector 40pin and 44pin plus one sata ii connector. Support Hot Swapping. What we offersata/ide to usb 3.

0 adapter hard drive cable x1, 12v 2a power Adapter x1, 4PIN Power Cable x1; 24h-friendly customer service and email support. On/off switch for HDD protection. Support sata 2. 5"/3. 5" hdd up to 10 tb, cd-rom, dvd-rw, dvd-rom, CD-RW, IDE 2.55"/3. 5" hdd, dvd + rw optical Drive. Support windows xp/vista/7/8/10 and Mac OS. Stable power supplyincluded 12v 2a power cable. Automatic sleep mode after 30 minutes of inactivity. 4pin power cable is designed for 3. 5’’ ide drive. Driver freeplug and play. Superspeed usb 3. 0data transfer rates up to 5gbps, backward compatible with USB 2. 0/1. 1.
BrandUnitek #ad
ManufacturerOcean Technology LLC #ad
Height2.75 Inches
Length3.8 Inches
Weight0.45 Pounds
Width0.7 Inches
Part NumberY-3324
ModelY-3324
Warranty2-year warranty

10. FIDECO

 #ad

5.25-Inch DVD-ROM/CD-ROM/CD-RW/DVD-RW/DVD+RW, 2.5 Inch SSD, Hard Drive Adapter Cable Converter for Universal 2.5/3.5 Inch SATA and IDE HDD, FIDECO SATA/IDE to USB 3.0 Adapter

#ad
FIDECO #ad - Data transfer has never been so much easier and faster. It can be also backward compatible with USB 2. 0/1. 1. Note: For 3. 5” ide hdd, you need to connect the 4-pin power cable.

It can support the connection of 3 hard drives simultaneously: one 2. 5” ide, one 3. 5” ide, one 2. 5”/3. 5” sata. Easy set-upsimply insert your hard drive, connect the power adapter and USB cable, and then turn on the device by pressing the power switch. If 2. 5" and 3. 5" ide hard drives are connected simultaneously, please go to "Disk Management" to initialize it first, so you need to set jumper for 3. 5" ide hard drive and set it to slave. The default master is 2. 5" ide hard drive, and then your hard drive can be recognized. Warm notefor new hard drive, you need to set jumper. Supported hdd/ssdfideco ide and sata adapter is compatible with 2. 5”/3. 5” sata/ide hard drives.
BrandFIDECO #ad
ManufacturerFIDECO #ad
Height1.44 Inches
Length2.3 Inches
Width0.43 Inches
Part NumberS3G-PL03-1
ModelS3G-PL03-1

Tags: