As an Amazon Associate I earn from qualifying purchases.
ARKON #ad - Gooseneck and swivel ball provide ultimate flexibility in viewing device. No. 6, 585, 212. 2 year limited. Pat. S. Holds all samsung Galaxy phones and midsize tablets up to 8 inch screen size. Recommended for fleets and service vehicles. U.
ARKON #ad - Recommended for use with fleets and service vehicles. Mount’s spring-loaded holder fits devices up to 8 inch screen size.
ARKON #ad - Gooseneck and swivel ball help position device. Seat rail mount fits devices up to 8 inch screen size including iPhone XS Max XS XR X 8 Galaxy S10 S9 Note 9. No. For fleets and service vehicles and trucks. 6, 585, 212. U. S. Pat.
AZXYI #ad - And wait at least 24 hours to use for the better adhesion. 6 pcs alcohol prep padsto maximize adhesive contact, please clean the adhesive surface with alcohol pad before use and let it dry, free of contaminates. Very high bond & easy to removethese high-strength, bonding almost instantly with no drying time. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard.
You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, wireless charger base, ETC, camera mount, dash camera mount holder etc on the market.6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3. 15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
ARKON #ad - 6, 585, 212. No. Low vibration 4 hole amPS mount attaches with screws to walls and other solid flat surfaces. U. S. Iphone xs max xs xr x 8 galaxy s10 s9 Note 9 8 5 compatible. Pat.
VICSEED #ad - This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. One-hand operation: the car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.
Fit well for all mobile phones between 4''-7''in width and most thick case. Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4. 84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities.
Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. It easily sticks securely on the dashboard or most flat surfaces. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry. Vicseed upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience.
ARKON #ad - Pat. S. 6, 585, 212. Holds tablets 7 to 18. 4 inches in screen size. No. For office, workspace, wheelchair rail, or home gym. U. Tab086-12 tablet mount clamps to tables, desks and other clampable surfaces up to 3. 5 inches thick.
TORRAS #ad - Note: the sticky pad just can be used once, 1 strong air vent clip, 1 sticky pad, you can get a package including 1 enhanced suction cup, please think twice to stick it. It fits perfectly for your car no matter what the thicker blades vents or vertical ones. This clip more than 10X sturdier than normal ones. Completely friendly, hands-free and views-adjustable! Easy&real hands-free: release easily with one button, google pixel 3a/4 xl, clamp fast with one hand! ▶the car phone holder mount is suitable for all kinds of mobile phones with brand thick cases, battery cases, Samsung galaxy s21 /s20/s20+/s20 ultra 5G/note 20/10 plus/10/9 plus/9/s10/s9/a10e, Ring cases and it is exceptionally sturdy to hold your phone tightly.
Like iphone se /11/ 11 pro/11 pro max /x/ xs max/xr/8 plus/8/7/6s plus, LG v20, One Plus and more. 2021 enhanced vent clip: you can screw the nut to fix the clamp freely, the sturdier it will be! its two small arms are just enough to press against the upper and lower vent blades to form a stable triangular structure and lighten the load on the middle one, the tighter you screw, with no damage to your car. What you get: torras ensures you with an 36-month pleasant experience and top customer service. With the car holder for cell phone, and 1 user manual.
ARKON #ad - Pat. No. 6, 585, 212. Seat rail or floor mount is ideal for service vehicles fleets and trucks. Tablet mount features a 22-inch gooseneck. U. S. Slim grip holder fits tablets 7 to 18. 4 inches in screen size.
VICSEED #ad - Any dissatisfaction, feel free contact us to get replacement or refund. True universal cell phone holder for car super wide arm enables this car cell phone holder mount to fit for all smart phones and thick cases. Multi-function cell phone holder 3 in 1 multiple functions car phone holder, taxis; good assistant for Uber, suv, made with best airliner PTFE PC material, trucks, pickup trucks, can be mounted on dashboard windshield or air vent firmly.
It is compatible with iphone 13/ 13 mini/ 13 pro/ 13 pro max/ 12/ 12 mini/ 12 pro/ 12 pro max/ se/ 11/ 11 pro/ 11 pro max/ xs/ xr/ xs max/ x/ 8/ 8 plus/ 7/ 7 plus/ se/ 6s/ samsung galaxy note20/ s20/ s20+/ s20 ultra 5g/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge, LG, Nokia and all cellphones, Sony, Google, Sony, GPS device.
Release your smart phone by pressing the left bottom release button in one second. Find a best view for your trip. 360 degrees rotation car cell phone mount the 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. The extra dashboard pad, provides smooth surface. One small car mount or car vent mount feeds your different usage needs. That is convenient to navigate, pickup phone calls. So the car holder can stay more firmly and securely.
1. ARKON
#adArkon Adhesive Car Phone or Midsize Tablet Holder Mount for Samsung Galaxy S10 S9 S8 Note 9 8 Retail Black
#adMore information #ad
| Brand | ARKON #ad |
| Manufacturer | Arkon #ad |
| Height | 2 Inches |
| Length | 8 Inches |
| Width | 6 Inches |
| Part Number | SGN228 |
| Model | SGN228 |
| Warranty | 2 Year |
More information #ad
2. ARKON
#ad"1""" SM628, ARKON Phone and Midsize Tablet Adhesive Car Truck Mount for iPhone XS Max XS XR X 8 iPad mini Retail Black
#adMore information #ad
| Brand | ARKON #ad |
| Manufacturer | Arkon #ad |
| Height | 1.25 Inches |
| Length | 6.2 Inches |
| Weight | 0.3 Pounds |
| Width | 5.5 Inches |
| Part Number | SM628 |
| Model | SM628 |
| Warranty | 2 Year |
More information #ad
3. ARKON
#adSM688L22, Arkon Car Seat Rail Phone or Tablet Mount for iPhone XS Max XS XR X 8 Galaxy Note 9 8 S10 Retail Black
#adMore information #ad
| Brand | ARKON #ad |
| Manufacturer | Arkon #ad |
| Height | 12 Inches |
| Length | 22 Inches |
| Weight | 1 Pounds |
| Width | 2 Inches |
| Part Number | SM688L22 |
| Model | SM688L22 |
| Warranty | 2 Year |
More information #ad
4. AZXYI
#adAZXYI 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Very High Bond Sticky Adhesive, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount
#adYou can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
More information #ad
Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Press down repeatedly to increase the contact of the adhesive with the substrate. Please wait 24 HOURS to use. It also resists heat and moisture, double-sided adhesive pads let you quickly and easily create a long-lasting bond, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, wireless charger base, ETC, camera mount, dash camera mount holder etc on the market.6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3. 15" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 0.04 Inches |
| Length | 3.15 Inches |
| Width | 3.15 Inches |
| Part Number | AZXYI-6DR |
| Model | AZXYI-6DR |
More information #ad
5. ARKON
#adARKON Heavy Duty Drill Base Mount for Note 9 8 iPhone XS Max XS XR X 8 iPad mini Galaxy Tab Retail Black RM6AMPS2T
#adMore information #ad
| Brand | ARKON #ad |
| Manufacturer | Arkon #ad |
| Height | 3 Inches |
| Length | 12 Inches |
| Width | 6 Inches |
| Part Number | RM6AMPS2T |
| Model | RM6AMPS2T |
| Warranty | 2 Year |
More information #ad
6. VICSEED
#adThick Case & Big Phones Friendly Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones, VICSEED Car Phone Mount
#adFit well for all mobile phones between 4''-7''in width and most thick case. Long arm design & multiple viewing angle: the car mount for iphone 11 has a telescopic arm that extends from 4. 84" - 9. 05" and can pivot up or down for a variety of angles which optimizes viewing capabilities.
More information #ad
3 in 1 universal car mount: vicseed car cell phone holder made with airliner ptfe material, taxis; good assistant for Uber, pickup trucks, SUV, windshield or vent to meet your demand at your convenience and requirements. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. It easily sticks securely on the dashboard or most flat surfaces. Perfect protection: say goodbye to the easy-scratched plastic panel car mount. Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry. Vicseed upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience.
| Brand | VICSEED #ad |
| Manufacturer | VICSEED #ad |
| Height | 1.18 Inches |
| Length | 3.94 Inches |
| Weight | 0.73 Pounds |
| Width | 3.15 Inches |
| Part Number | SB-304 |
| Model | BS-BIRD9384 |
| Warranty | 30 Days |
More information #ad
7. ARKON
#adArkon TAB086-12 Heavy Duty Tablet Clamp Mount with 12 inch Neck for iPad Pro iPad Air Galaxy Note 10.1 Retail Black
#adMore information #ad
| Brand | ARKON #ad |
| Manufacturer | Arkon #ad |
| Height | 3 Inches |
| Length | 12 Inches |
| Weight | 1.5 Pounds |
| Width | 8 Inches |
| Part Number | TAB086-12 |
| Model | TAB086-12 |
| Warranty | 2 year limited warranty |
More information #ad
8. TORRAS
#adUniversal Car Phone Mount Dashboard Windshield Vent Compatible with iPhone 13 12 11 Pro Max XS X XR 8 SE, Samsung Galaxy S20+Ultra S10 Note 10 Plus, TORRAS Ultra-Durable Cell Phone Holder for Car
#adMore information #ad
Please feel free to let us know if have any questions about this car phone mount. Military grade sturdiness test: the latest enhanced torras cell phone holder for car passed the military-grade sturdiness test! Absolutely sturdier 20 x than normal ones! The suction cup can withstand the temperature from -20℃（-4°F to 95℃/203°F, also be reusable! You can stick it on your car dash or windshield. Like iphone se /11/ 11 pro/11 pro max /x/ xs max/xr/8 plus/8/7/6s plus, LG v20, One Plus and more. 2021 enhanced vent clip: you can screw the nut to fix the clamp freely, the sturdier it will be! its two small arms are just enough to press against the upper and lower vent blades to form a stable triangular structure and lighten the load on the middle one, the tighter you screw, with no damage to your car. What you get: torras ensures you with an 36-month pleasant experience and top customer service. With the car holder for cell phone, and 1 user manual.
| Brand | TORRAS #ad |
| Manufacturer | TORRAS #ad |
| Height | 3.94 Inches |
| Length | 5.12 Inches |
| Weight | 0.5 Pounds |
| Width | 2.36 Inches |
| Part Number | CTVK06-JP |
| Model | CHANG 4in1 |
| Warranty | 36 Months |
More information #ad
9. ARKON
#adArkon Mounts TAB188L22 Car or Truck Seat Rail or Floor Tablet Mount with 22 inch Arm Retail Black
#adMore information #ad
| Brand | ARKON #ad |
| Manufacturer | Arkon #ad |
| Height | 3 Inches |
| Length | 15 Inches |
| Weight | 1 Pounds |
| Width | 8 Inches |
| Part Number | TAB188L22 |
| Model | TAB188L22 |
| Warranty | Check Manufacturer |
More information #ad
10. VICSEED
#adVICSEED Universal Cell Phone Holder for Car Solid & Durable Car Phone Holder Mount for Dashboard Windshield Air Vent Long Arm Strong Suction Cell Phone Car Mount Thick Case Heavy Phones Friendly
#adIt is compatible with iphone 13/ 13 mini/ 13 pro/ 13 pro max/ 12/ 12 mini/ 12 pro/ 12 pro max/ se/ 11/ 11 pro/ 11 pro max/ xs/ xr/ xs max/ x/ 8/ 8 plus/ 7/ 7 plus/ se/ 6s/ samsung galaxy note20/ s20/ s20+/ s20 ultra 5g/ Note10/ Note10+/ S10/ S10+/ S10e/ S9/ S9+/ S8/ S8+/ Note8/ S7/ S7 Edge, LG, Nokia and all cellphones, Sony, Google, Sony, GPS device.
More information #ad
Apply to most of cars, Lyft drivers. Release your smart phone by pressing the left bottom release button in one second. Find a best view for your trip. 360 degrees rotation car cell phone mount the 360 degrees ball joint and the adjustable telescopic arm make you able to adjust your phone to any angles and any places. The extra dashboard pad, provides smooth surface. One small car mount or car vent mount feeds your different usage needs. That is convenient to navigate, pickup phone calls. So the car holder can stay more firmly and securely.
| Brand | VICSEED #ad |
| Manufacturer | VICSEED #ad |
| Height | 2.8 Inches |
| Length | 5.98 Inches |
| Weight | 0.7 Pounds |
| Width | 4.61 Inches |
| Warranty | 1-year Manufacture Warranty |
More information #ad
